Community news

Speleology in Kazakhstan

Shakalov on 04 Jul, 2018
Hello everyone!   I pleased to invite you to the official site of Central Asian Karstic-Speleological commission ("Kaspeko")   There, we regularly publish reports about our expeditions, articles and reports on speleotopics, lecture course for instructors, photos etc. ...

New publications on hypogene speleogenesis

Klimchouk on 26 Mar, 2012
Dear Colleagues, This is to draw your attention to several recent publications added to KarstBase, relevant to hypogenic karst/speleogenesis: Corrosion of limestone tablets in sulfidic ground-water: measurements and speleogenetic implications Galdenzi,

The deepest terrestrial animal

Klimchouk on 23 Feb, 2012
A recent publication of Spanish researchers describes the biology of Krubera Cave, including the deepest terrestrial animal ever found: Jordana, Rafael; Baquero, Enrique; Reboleira, Sofía and Sendra, Alberto. ...

Caves - landscapes without light

akop on 05 Feb, 2012
Exhibition dedicated to caves is taking place in the Vienna Natural History Museum   The exhibition at the Natural History Museum presents the surprising variety of caves and cave formations such as stalactites and various crystals. ...

Did you know?

That stratification is 1. a depositional structure of sedimentary rocks in beds and layers [16]. 2. the separation into non-discrete layers of water as a result of chemical, saline, or temperature differences which in turn create density differences in the water.?

Checkout all 2699 terms in the KarstBase Glossary of Karst and Cave Terms

What is Karstbase?



Browse Speleogenesis Issues:

KarstBase a bibliography database in karst and cave science.

Featured articles from Cave & Karst Science Journals
Chemistry and Karst, White, William B.
See all featured articles
Featured articles from other Geoscience Journals
Karst environment, Culver D.C.
Mushroom Speleothems: Stromatolites That Formed in the Absence of Phototrophs, Bontognali, Tomaso R.R.; D’Angeli Ilenia M.; Tisato, Nicola; Vasconcelos, Crisogono; Bernasconi, Stefano M.; Gonzales, Esteban R. G.; De Waele, Jo
Calculating flux to predict future cave radon concentrations, Rowberry, Matt; Marti, Xavi; Frontera, Carlos; Van De Wiel, Marco; Briestensky, Milos
Microbial mediation of complex subterranean mineral structures, Tirato, Nicola; Torriano, Stefano F.F;, Monteux, Sylvain; Sauro, Francesco; De Waele, Jo; Lavagna, Maria Luisa; D’Angeli, Ilenia Maria; Chailloux, Daniel; Renda, Michel; Eglinton, Timothy I.; Bontognali, Tomaso Renzo Rezio
Evidence of a plate-wide tectonic pressure pulse provided by extensometric monitoring in the Balkan Mountains (Bulgaria), Briestensky, Milos; Rowberry, Matt; Stemberk, Josef; Stefanov, Petar; Vozar, Jozef; Sebela, Stanka; Petro, Lubomir; Bella, Pavel; Gaal, Ludovit; Ormukov, Cholponbek;
See all featured articles from other geoscience journals

Search in KarstBase

Your search for fluid-inclusion (Keyword) returned 32 results for the whole karstbase:
Showing 1 to 15 of 32
Identification of the origin of oreforming solutions by the use of stable isotopes, 1977, Sheppard S. M. F. ,
SynopsisThe four major different types of water -- magmatic, metamorphic, sea water and/or connate, and meteoric water -- have characteristic hydrogen (D/H) and oxygen (18O/16O) isotope ratios. Applied to the analysis of isotopic data on hydrothermal minerals, fluid inclusions and waters from active geothermal systems, these ratios indicate that waters of several origins are involved with ore deposition in the volcanic and epizonal intrusive environment. Water of a single origin dominates main-stage mineralization in some deposits: magmatic -- Casapalca, Peru (Ag-Pb-Zn-Cu); meteoric -- Butte, Montana (Cu-Zn-Mn), epithermal deposits, e.g. Goldfield, Tonopah, Nevada (Ag-Au), Pachuca, Mexico (Ag-Au), San Juan Mountains District, Colorado (Ag-Au-Pb-Zn); sea water -- Troodos, Cyprus (Fe-Cu), Kuroko, Japan (Fe-Cu-Pb-Zn). Solutions of more than one origin are important in certain deposits (magmatic and meteoric -- porphyry copper and molybdenum deposits) and are present in many. In the porphyry Cu-Mo deposits the initial major ore transportation and alteration processes (K-feldspar-biotite alteration) are magmatic-hydrothermal events that occur at 750-500{degrees}C. These fluids are typically highly saline Na-K-Ca-Cl-rich brines (more than 15 wt % equivalent NaCl). The convecting meteoric-hydrothermal system that develops in the surrounding country rocks with relatively low integrated water/rock ratios (less than 0.5 atom % oxygen) subsequently collapses in on a waning magmatic-hydrothermal system at about 350-200{degrees}C. These fluids generally have moderate to low salinities (less than 15 wt % equivalent NaCl). Differences among these deposits are probably in part related to variations in the relative importance of the meteoric-hydrothermal versus the magmatic-hydrothermal events. The sulphur comes from the intrusion and possibly also from the country rocks. Deposits in which meteoric or sea water is the dominant constituent of the hydrothermal fluids come from epizonal intrusive and sub-oceanic environments where the volcanic country rocks are fractured or well jointed and highly permeable. Integrated water/rock ratios are typically high, with minimum values of 0.5 or higher (atom % oxygen) -- the magmatic water contribution is often drowned out'. Salinities are low to very low (less than 10 wt % equivalent NaCl), and temperatures are usually in the range 350-150{degrees}C. The intrusion supplies the energy to drive the large-scale convective circulation system. The sulphur comes from the intrusion, the country rocks and/or the sea water. Argillic alteration, which occurs to depths of several hundred metres, generated during supergene weathering in many of these deposits is isotopically distinguishable from hydrothermal clays

Oxygen, sulfur, and strontium isotope and fluid inclusion studies of barite deposits from the Iglesiente-Sulcis mining district, Southwestern Sardinia, Italy, 1989, Cortecci G, Fontes Jc, Maiorani A, Perna G, Pintus E, Turi B,

Petrographic and geochemical evidence for origin of paleospeleothems, New Mexico; implications for the application of fluid inclusions to studies of diagenesis, 1990, Goldstein Robert H. ,

The lead-zinc ore deposits of the Siding-Gudan mineral subdistrict Guangxi are part of the large Nanling district of South China, and hosted in Devonian carbonate rocks. The ore bodies occur significantly along main faults and fault zones, and concentrate up to 300 meters above the Cambrian/Devonian unconformity. Connected with hydrothermal karst, size and volume of the ore bodies increase in proximity to this unconformity. Moving from the unaffected host rocks to the center of the ore bodies, four zones can be discriminated by the mineral assemblage (pyrite, sphalerite, galena) as well as by the degree of ordering, Ca/Mg, and Fe/Mn ratios of different dolomites. Homogenization temperatures range from 80-100-degrees-C (Presqu'ile dolomite) to 230-260-degrees-C (massive sphalerite). The sulfides reveal delta-S-34 = -20 to parts per thousand, and fluid inclusions display a salinity of 5-12 wt % equivalent NaCl. The diagenetic and hydrothermal history is similar to that of classic Mississippi Valley Type (MVT) sulfide mineral deposits as, for example, Pine Point in Canada. Mineralization and remobilization of the sulfides took place during a wide time span from late Paleozoic through Mesozoic. Both processes are considered as an interaction of saline basinal brines ascended from the adjoining dewatering trough, and magmatic-hydrothermal fluids of several magmatic-tectonic events

Petrography of the Lower Ordovician Ellenburger Group, both in deeply-buried subsurface cores and in outcrops which have never been deeply buried, documents five generations of dolomite, three generations of microquartz chert, and one generation of megaquartz. Regional periods of karstification serve to subdivide the dolomite into 'early-stage', which predates pre-Middle Ordovician karstification, and 'late-stage', which postdates pre-Middle Ordovician karstification and predates pre-Permian karstification. Approximately 10% of the dolomite in the Ellenburger Group is 'late-stage'. The earliest generation of late-stage dolomite, Dolomite-L1, is interpreted as a precursor to regional Dolomite-L2. L1 has been replaced by L2 and has similar trace element, O, C, and Sr isotopic signatures, and similar cathodoluminescence and backscattered electron images. It is possible to differentiate L1 from L2 only where cross-cutting relationships with chert are observed. Replacement Dolomite-L2 is associated with the grainstone, subarkose, and mixed carbonate-siliciclastic facies, and with karst breccias. The distribution of L2 is related to porosity and permeability which focused the flow of reactive fluids within the Ellenburger. Fluid inclusion data from megaquartz, interpreted to be cogenetic with Dolomite-L2, yield a mean temperature of homogenization of 85 6-degrees-C. On the basis of temperature/delta-O-18-water plots, temperatures of dolomitization ranged from approximately 60 to 110-degrees-C. Given estimates of maximum burial of the Ellenburger Group, these temperatures cannot be due to burial alone and are interpreted to be the result of migration of hot fluids into the area. A contour map of delta-O-18 from replacement Dolomite-L2 suggests a regional trend consistent with derivation of fluids from the Ouachita Orogenic Belt. The timing and direction of fluid migration associated with the Ouachita Orogeny are consistent with the timing and distribution of late-stage dolomite. Post-dating Dolomite-L2 are two generations of dolomite cement (C1 and C2) that are most abundant in karst breccias and are also associated with fractures, subarkoses and grainstones. Sr-87/Sr-86 data from L2, C1, and C2 suggest rock-buffering relative to Sr within Dolomite-L2 (and a retention of a Lower Ordovician seawater signature), while cements C1 and C2 became increasingly radiogenic. It is hypothesized that reactive fluids were Pennsylvanian pore fluids derived from basinal siliciclastics. The precipitating fluid evolved relative to Sr-87/Sr-86 from an initial Pennsylvanian seawater signature to radiogenic values; this evolution is due to increasing temperature and a concomitant evolution in pore-water geochemistry in the dominantly siliciclastic Pennsylvanian section. A possible source of Mg for late-stage dolomite is interpreted to be from the dissolution of early-stage dolomite by reactive basinal fluids

Several kinds of base metal deposits occur in the lower Paleozoic of southwest Sardinia (Iglesiente-Sulcis mineral district). This paper deals with those deposits which are generally referred to as Permo-Triassic, because they accompany and postdate the Hercynian orogeny and are related to magmatic activity. A large number of previously published geochemical data, integrated with additional new data (Sr, Pb, O, C, and S isotopes), are reviewed and discussed in the frame of the late to post-Hercynian geologic evolution of southwest Sardinia. According to geological and mineralogical characteristics, three types of deposits can be distinguished: (1) skarn ores related to late Hercynian leucogranitic intrusions, (2) high-temperature veins, and (3) low-temperature veins and karst filling. Pervasive epigenetic dolomitization phenomena are geochemically related to the low-temperature deposits. Sr and Pb isotopes of the first and second types (0.7097-0.7140 Sr-87/Sr-86; 17.97-18.29 Pb-206/Pb-204; 38.11-38.45 Pb-208/Pb-204) are distinctly more radiogenic than those of the third type (0.7094-0.7115 Sr-87/Sr-86; 17.86-18.05 Pb-206/Pb-204; 37.95-38.19 Pb-208/Pb-204) which, in turn, are closer to Paleozoic ores and carbonates. Fluid inclusion data indicate that the fluids responsible for mineralization of the first and second types of deposits were hot and dilute (T(h)= 370-degrees-140-degrees-C; <5 wt % NaCl equiv). In contrast, relatively colder and very saline fluids (T(h)= 140-degrees-70-degrees-C; >20 wt % NaCl equiv) were responsible for the third type of mineralization, as well for epigenetic dolomitization of the Cambrian host rocks. O isotopes measured in minerals from the first two types (deltaO-18SMOW = 12.8-18.9 parts per thousand) are O-18 depleted with respect to the third type (deltaO-18SMOW = 15.9-22.1 parts per thousand). These data, coupled with fluid inclusion formation temperatures, indicate that the fluids responsible for the first two types of mineralization were O-18 enriched with respect to those of the third type and related hydrothermal phenomena. The deltaS-34CDT in sulfides of the first two types vary between 3.7 and 10.73 per mil, whereas the values of the third type range from 12.0 to 17.9 per mil. Late to post-Hercynian mineralization is thus explained as the result of three distinct, though partly superimposed, hydrothermal systems. System 1 developed closer to the late Hercynian leucogranitic intrusions and led to the formation of the first and subsequently the second type of mineralization. The relatively hot and diluted fluids had a heated meteoric, or even partly magmatic, origin. Metals were leached from an external, radiogenic source, represented either by Hercynian leucogranites or by Paleozoic metasediments. Sulfur had a partly magmatic signature. System 2 was characterized by very saline, colder fluids which promoted dolomitization, silicification, and vein and karst mineralization. These fluids share the typical characteristics of formation waters, even though their origins remain highly speculative. The hydrothermal system was mainly rock dominated, with only a minor participation of the external radiogenic source of metals. Sulfur was derived by recirculation of pre-Hercynian strata-bound ores. System 3 records the invasion of fresh and cold meteoric waters which precipitated only minor ore and calcite gangue. It may represent the further evolution of system 2, possibly spanning a time well after the Permo-Triassic. The timing of all these phenomena is still questionable, due to the poor geologic record of the Permo-Triassic in southwest Sardinia. Nevertheless, the hypothesized scenario bears many similarities with hydrothermal processes documented throughout the Hercynian in Europe and spanning the same time interval. A comparison with the latter mineralization and hydrothermal activities leads to the hypothesis that the first two types of mineralization are linked to late Hercynian magmatic activity, whereas the third type may be related to either strike-slip or tensional tectonics which, throughout Europe mark the transition from the Hercynian orogeny to the Alpine cycle

Palaeoclimate determination from cave calcite deposits, 1992, Gascoyne M,
Calcite deposits formed in limestone caves have been found to be an excellent repository of palaeoclimatic data for terrestrial environments. The very presence of a relict deposit indicates non-glacial conditions at the time of formation, and both 14C and uranium-series methods can be used to date the deposit and, hence, the age of these climatic conditions. Variations in 13C and 18O content of the calcite, in 2H and 18O content of fluid inclusions, in trace element concentrations and, more recently, in pollen assemblages trapped in the calcite, are all potentially available as synchronous palaeoclimatic indicators. Previous work has tended to concentrate mainly on abundance of deposits as a palaeoclimatic indicator for the last 300,000 years. This literature is briefly reviewed here, together with the theory and methods of analysis of the U-series and stable isotopic techniques. The combined use of U-series ages and 13C and 18O variations in cave calcites illustrates the potential for palaeoclimate determination. Previously unpublished results of stable isotopic variations in dated calcites from caves in northern England indicate the level of detail of stable isotopic variations and time resolution that can be obtained, and the complexity of interpretation that may arise. Tentative palaeoclimatic signals for the periods 90-125 ka and 170-300 ka are presented. More comprehensive studies are needed in future work, especially in view of the difficulty in obtaining suitable deposits and the ethics of cave deposits conservation

The Ozark region of the U.S. midcontinent is host to a number of Mississippi Valley-type districts, including the world-class Viburnum Trend, Old Lead Belt, and Tri-State districts and the smaller Southeast Missouri barite, Northern Arkansas, and Central Missouri districts. There is increasing evidence that the Ozark Mississippi Valley-type districts formed locally within a large, interconnected hydrothermal system that also produced broad fringing areas of trace mineralization, extensive subtle hydrothermal alteration, broad thermal anomalies, and regional deposition of hydrothermal dolomite cement. The fluid drive was provided by gravity flow accompanying uplift of foreland thrust belts during the Late Pennsylvanian to Early Permian Ouachita orogeny. In this study, we use chemical speciation and reaction path calculations, based on quantitative chemical analyses of fluid inclusions, to constrain likely hydrothermal brine compositions and to determine which precipitation mechanisms are consistent with the hydrothermal mineral assemblages observed regionally and locally within each Mississippi Valley-type district in the Ozark region. Deposition of the regional hydrothermal dolomite cement with trace sulfides likely occurred in response to near-isothermal effervescence of CO2 from basinal brines as they migrated to shallower crustal levels and lower confining pressures. In contrast, our calculations indicate that no one depositional process can reproduce the mineral assemblages and proportions of minerals observed in each Ozark ore district; rather, individual districts require specific depositional mechanisms that reflect the local host-rock composition, structural setting, and hydrology. Both the Northern Arkansas and Tri-State districts are localized by normal faults that likely allowed brines to rise from deeper Cambrian-Ordovician dolostone aquifers into shallower carbonate sequences dominated by limestones. In the Northern Arkansas district, jasperoid preferentially replaced limestones in the mixed dolostone-limestone sedimentary packages. Modeling results indicate that the ore and alteration assemblages in the Tri-State and Northern Arkansas districts resulted from the flow of initially dolomite-saturated brines into cooler limestones. Adjacent to fluid conduits where water/rock ratios were the highest, the limestone was replaced by dolomite. As the fluids moved outward into cooler limestone, jasperoid and sulfide replaced limestone. Isothermal boiling of the ore fluids may have produced open-space filling of hydrothermal dolomite with minor sulfides in breccia and fault zones. Local mixing of the regional brine with locally derived sulfur undoubtedly played a role in the development of sulfide-rich ore runs. Sulfide ores of the Central Missouri district are largely open-space filling of sphalerite plus minor galena in dolostone karst features localized along a broad anticline. Hydrothermal solution collapse during ore deposition was a minor process, indicating dolomite was slightly undersaturated during ore deposition. No silicification and only minor hydrothermal dolomite is present in the ore deposits. The reaction path that best explains the features of the Central Missouri sulfide deposits is the near-isothermal mixing of two dolomite-saturated fluids with different H2S and metal contents. Paleokarst features may have allowed the regional brine to rise stratigraphically and mix with locally derived, H2S-rich fluids

Brittle tectonics and major dextral strike-slip zone in the Buda karst (Budapest, Hungary), 1999, Benkovics L, Obert D, Bergerat F, Mansy Jl, Dubois M,
Three large (kilometric-scale) caves were studied in the Buda hills and the main directions of cave corridors, fault planes and mineralized veins were measured. Different stages of mineralizations are recognised: calcite scaleno-hedrons, baryte, silica, gypsum. New investigations of fluid inclusions in the baryte suggest a crystallization temperature of 50 degrees C and a freshwater fluid source. Microtectonic analysis allows the reconstruction of the successive tectonic events: (1) a NE-SW extensional phase at the Late Eocene-Early Oligocene limit (phase I), (2) a strike-slip phase with NW-SE compression and NE-SW extension during the Late Oligocene-Early Miocene (phase II), (3) a NW-SE transtensional phase (phase III) and finally (4) a NE-SW extensional phase of Quaternary age (phase IV). The major phase is the strike-slip one, characterized by an important dextral strike-slip zone: the Ferenc-hegy zone. (C) Elsevier, Paris

Vein and Karst Barite Deposits in the Western Jebilet of Morocco: Fluid Inclusion and Isotope (S, O, Sr) Evidence for Regional Fluid Mixing Related to Central Atlantic Rifting, 2000, Valenza Katia, Moritz Robert, Mouttaqi Abdellah, Fontignie Denis, Sharp Zachary,
Numerous vein and karst barite deposits are hosted by Hercynian basement and Triassic rocks of the western Jebilet in Morocco. Sulfur, oxygen, and strontium isotope analyses of barite, combined with fluid inclusion microthermometry on barite, quartz, and calcite were used to reveal the nature and source of the ore-forming fluids and constrain the age of mineralization. The{delta} 34S values of barite between 8.9 and 14.7 per mil are intermediate between the sulfur isotope signatures of Triassic evaporites and Triassic-Jurassic seawater and lighter [IMG]f1.gif' BORDER='0'>, probably derived from the oxidation of dissolved H2S and leaching of sulfides in the Hercynian basement. The 87Sr/86Sr ratios of barite between 0.7093 and 0.7130 range between the radiogenic strontium isotope compositions of micaceous shale and sandstone and the nonradiogenic isotopic signature of Triassic to Jurassic seawater and Cambrian limestone. The{delta} 18O values of barite between 11 and 15 per mil (SMOW) support mixing between two or more fluids, including Late Triassic to Jurassic seawater or a water dissolving Triassic evaporites along its flow path, hot basinal, or metamorphic fluids with{delta} 18O values higher than 0 per mil and/or meteoric fluids with{delta} 18O values lower than 0 per mil. The general trend of decreasing homogenization temperatures and initial ice melting temperatures with increasing salinities of H2O-NaCl {} CaCl2 fluid inclusions trapped in barite, quartz, and calcite indicates that a deep and hot basinal fluid with salinities lower than 6 wt percent NaCl equiv might have mixed with a cooler surficial solution with a mean salinity of 20 wt percent NaCl equiv. Calcium was leached from the Cambrian limestone and the clastic and mafic volcanic rocks of the Hercynian basement. Alkali feldspars and micas contained in the Cambrain sandstones provided most of the Ba to the hydrothermal system. Vein and karst deposits are modeled as a two-component mixing process in which the temperature and the S and Sr isotope composition of the end members changed during the 220 to 155 Ma interval. The hot basinal fluid remained volumetrically dominant during the entire mineralization process. Differences in mean S, O, and Sr isotope compositions among the barite families are interpreted as reflecting differences in mineralization age. Most barite deposits formed before the Kimmeridgian, except for north-south-oriented vein barite, karst barite, and barite cement in the conglomeratic Upper Jurassic, which were deposited later, possibly around 155 Ma. Similar genetic processes have been described for late Paleozoic to Mesozoic F-Ba vein deposits in western Europe. The vein and karst barite in the western Jebilet of Morocco reveals a wide-scale regional mineralization event related to Central Atlantic rifting

Dolomitization and Dolomite Neomorphism: Trenton and Black River Limestones (Middle Ordovician) Northern Indiana, U.S.A, 2000, Yoo Chan Min, Gregg Jay M. , Shelton Kevin L. ,
The Trenton and Black River Limestones are dolomitized extensively along the axis of the Kankakee Arch in Indiana, with the proportion of dolomite decreasing to the south and southeast of the arch. Planar and nonplanar dolomite replacement textures and rhombic (type 1) and saddle (type 2) void-filling dolomite cements are present. Three stages of dolomitization, involving different fluids, are inferred on the basis of petrographic and geochemical characteristics of the dolomites. Nonferroan planar dolomite has relatively high {delta}18O values (-1.8 to -6.1{per thousand} PDB) and has 87Sr/86Sr ratios (0.70833 to 0.70856) that overlap those of Middle Ordovician seawater. Petrography, geochemistry, and the geometry of the dolomitized body suggest that the planar dolomite was formed in Middle and Late Ordovician seawater during the deposition of the overlying Maquoketa Shale. Ferroan planar and nonplanar dolomite occurs in the upper few meters of the Trenton Limestone, confined to areas underlain by planar dolomite. This dolomite contains patches of nonferroan dolomite with cathodoluminescence (CL) characteristics similar to underlying planar dolomite. Ferroan dolomite has relatively low {delta}18O values (-5.1 to -7.3{per thousand} PDB) and has slightly radiogenic 87Sr/86Sr ratios (0.70915 to 0.70969) similar to those obtained for the overlying Maquoketa Shale. These data indicate that ferroan dolomite formed by neomorphism of nonferroan planar dolomite as fluids were expelled from the overlying Maquoketa Shale during burial. The absence of ferroan dolomite at the Trenton-Maquoketa contact, in areas where the earlier-formed nonferroan planar dolomite also is absent, indicates that the fluid expelled from the overlying shale did not contain enough Mg2 to dolomitize limestone. Type 1 dolomite cement has isotopic compositions similar to those of the ferroan dolomite, suggesting that it also formed from shale-derived burial fluids. CL growth zoning patterns in these cements suggest that diagenetic fluids moved stratigraphically downward and toward the southeast along the axis of the Kankakee Arch. Type 2 saddle dolomite cements precipitated late; their low {delta}18O values (-6.0 to -7.0{per thousand} PDB) are similar to those of the type 1 dolomite cement. However, fluid-inclusion data indicate that the saddle dolomite was precipitated from more saline, basinal fluids and at higher temperatures (94{degrees} to 143{degrees}C) than the type 1 cements (80{degrees} to 104{degrees}C). A trend of decreasing fluid-inclusion homogenization temperatures and salinities from the Michigan Basin to the axis of Kankakee Arch suggests that these fluids emerged from the Michigan Basin after precipitation of type 1 cement

The role of evaporites in the genesis of base metal sulphide mineralisation in the Northern Platform of the Pan-African Damara Belt, Namibia: geochemical and fluid inclusion evidence from carbonate wa, 2000, Chetty D, Frimmel He,
The Otavi Mountain Land is a base metal sulphide ore province in northern Namibia where deposits are hosted by platform carbonates of the Otavi Group in a foreland fold-and-thrust belt on the northern edge of the Pan-African Damara Belt. Deposits have been classified as the Berg Aukas- or Tsumeb-types, based on differences in ore association? stratigraphic position and geochemistry of ores and gangue carbonates. Mineralisation at these deposits is accompanied by carbonate alteration in the form of dolomite and calcite veins, carbonate recrystallisation, calcitisation and carbonate silicification. Based on cathodoluminescence imaging, trace and rare earth element (REE), O and C isotope, and fluid inclusion data, a series of carbonate generations, constituting wall rock alteration around the Tsumeb and Kombat (Tsumeb-type) and Berg Aukas (Berg Aukas-type) deposits, was established. Similar data obtained on the recently discovered Khusib Springs deposit indicate a strong affinity to Tsumeb-type deposits. Tsumeb-type deposits are distinguished from Berg Aukas-type deposits by having trace element and REE concentrations that are significantly higher in the alteration products compared to the carbonate host rocks. Only around Tsumeb-type deposits a relative enrichment in light REE is noted for the hydrothermal carbonate generations that are cogenetic with the main stage of mineralisation. Microthermometric results from fluid inclusions in carbonate alteration phases and associated quartz indicate relatively high salinity (17-33 wt% NaCl equivalent) for the main mineralising and subsequent sulphide remobilisation stages at the deposits investigated. Estimated mineralisation temperatures are significantly higher for Tsumeb-type deposits (370-405 degrees C) with early sulphide remobilisation in Tsumeb at 275 degrees C, whereas they are lower at Berg Aukas (up to 255 degrees C). Fluid inclusion leachate analysis suggests that most of the observed salinity can be ascribed to dissolved, predominantly Ca- and Mg-carbonates and chlorides with subordinate NaCl. Na-Cl-Br leachate systematics indicate a derivation of the fluid salinity from the interaction with evaporitic rocks en route. Tsumeb-type mineralisation is interpreted to be derived from fluids expelled during Pan-African orogeny in the more intensely deformed internal zones of the Damara Belt further south. When the high salinity fluids reached the carbonate platform after having scavenged high concentrations of base metals, base metal sulphide precipitation occurred in zones of high porosity, provided by karst features in the carbonate sequence. Results obtained for the Berg Aukas-type deposits emphasise their derivation from basinal brines, similar to Mississippi Valley-type deposits, and confirm that mineralisation of the Berg Aukas- and Tsumeb-types are both spatially and temporally distinct

Diagenesis and porosity evolution of the Upper Silurian-lowermost Devonian West Point reef limestone, eastern Gaspe Belt, Quebec Appalachians, 2001, Bourque Pa, Savard Mm, Chi G, Dansereau P,
Diagenetic analysis based on cathodoluminescence petrography, cement stratigraphy, carbon and oxygen stable isotope geochemistry, and fluid inclusion microthermometry was used to reconstruct the porosity history and evaluate the reservoir potential of the Upper Silurian-Lower Devonian West Point limestone in the eastern part of the Gaspe Belt. The West Point limestone was investigated in two areas: 1) In the Chaleurs Bay Synclinorium, the limestone diagenesis of the lower and middle complexes of the Silurian West Point Formation was affected by repeated subaerial exposure related to late Ludlovian third-order eustatic low-stands, which coincided with the Salinic block tilting that produced the Salinic unconformity. The Anse McInnis Member (middle bank complex) underwent freshwater dissolution, and mixed marine and freshwater cementation during deposition. Concurrently, the underlying Anse a la Barbe and Gros Morbe members (lower mound and reef complex) experienced dissolution by fresh water percolating throughout the limestone succession. Despite this early development of karst porosity, subsequent meteoric-influenced cementation rapidly occluded all remaining pore space in the Gros Morbe, Anse a la Barbe, and Anse McInnis limestones. In contrast, the overlying Colline Daniel Member limestone (upper reef complex) does not show the influence of any freshwater diagenesis. Occlusion of its primary porosity occurred during progressive burial and was completed under a maximum burial depth of 1.2 kin. 2) In the Northern Outcrop Belt, the diagenesis of the Devonian pinnacle reefs of the West Point Formation followed a progressive burial trend. The primary pores of the reef limestone were not completely occluded before the reefs were buried at a significant depth (in some cases, to 6 km). Therefore, hydrocarbon migration in subsurface buildups before primary porosity occlusion might have created reservoirs. Moreover, the presence of gaseous hydrocarbons in Acadian-related veins attests to a hydrocarbon source in the area

Sedimentologic, diagenetic and tectonic evolution of the Saint-Flavien gas reservoir at the structural front of the Quebec Appalachians, 2003, Bertrand R, Chagnon A, Malo M, Duchaine Y, Lavoie D, Savard Mm,
The Beekmantown Group (Lower Ordovician) of the Saint-Flavien reservoir has produced 162x106 m3 (5.7 bcf) of natural gas between 1980 and 1994. The conversion of the field into gas storage was initiated in 1992 and the pool became operational in 1998. Integration of structural and sedimentologic features, carbonate and organic matter petrography and geochemistry for 13 drill holes is used to define a tectonic-sedimentologic-diagenetic model for porosity evolution in these reservoir dolostones. The Beekmantown Group consists of numerous fifth-order shallowing-upward cycles 1.0 to 7.0 m thick (average of 2.4 m). Each cycle consists of a basal shale deposited during the initial flooding of the platform which was subsequently covered by a shoaling succession of subtidal and intertidal limestones to intertidal dolostones. Early dolomitization has produced intercrystalline porosity and preserved some moldic pores in the intertidal facies. Near surface, post-dolomite karstification has created vugs that were subsequently filled by early marine calcite fibrous cement based on the {delta}18O and {delta}13C ratios of calcite. Early burial elements consist of horizontal stylolites, pyrite and sphalerite. Late migrated bitumen was thermally altered or vaporized as native coke under deep burial conditions exceeding 240{degrees}C, partly due to overthrusting of Appalachian nappes. Under these conditions, breccias and fractures were generated and subsequently filled with K-feldspar, quartz, illite, and xenomorphic and poikilotopic calcite. The {delta}18O of the poikilotopic calcite and homogenization temperature of coeval fluid inclusions indicate formation under high temperatures (Th about 260{degrees}C). Horizontal shear zones and marcasite-rich vertical stylolites were produced during folding and thrusting. Dissolution has preferentially affected late fracture-filling calcite and generated most of the actual porosity during or soon after the Taconian Orogeny. The relationship between the occurrence of smectite and this type of porosity indicates the low temperature condition of this dissolution (T <100{degrees}C). Porosity in the Saint-Flavien reservoir has been mostly produced by fracture-controlled, late to post-Taconian dissolution of early to late calcite in the intertidal dolomitic slightly porous facies at the top of rhythmic cycles that compose the Beekmantown Group

Origin and Significance of Postore Dissolution Collapse Breccias Cemented with Calcite and Barite at the Meikle Gold Deposit, Northern Carlin Trend, Nevada, 2003, Emsbo P, Hofstra Ah,
The final event in a complicated hydrothermal history at the Meikle gold deposit was gold deficient but caused extensive postore dissolution of carbonate, collapse brecciation, and precipitation of calcite and barite crystals in the resulting cavities. Although previously interpreted to be part of the Carlin-type hydrothermal system, crosscutting relationships and U-Th-Pb geochronology constrain this hydrothermal event to late Pliocene time (ca. 2 Ma), nearly 36 Ma after ore formation. Mineralogic, fluid inclusion, and stable isotope data indicate that postore hydrothermal fluids were reduced, H2S-rich, unevolved meteoric waters ({delta}18O = -17{per thousand}) of low temperature (ca. 65{degrees}C). The{delta} 18O values of barite and calcite indicate that these minerals were in isotopic equilibrium, requiring that barite SO4 was derived from the oxidation of reduced sulfur; however, preexisting sulfides in breccia cavities were not oxidized. The{delta} 34S (15{per thousand}) values of barite are higher than those of local bulk sulfide and supergene alunite indicating that SO4 was not derived from supergene oxidation of local sulfide minerals. The 15 per mil {delta}34S value suggests that the H2S in the fluids may have been leached from sulfur-rich organic matter in the local carbonaceous sedimentary rocks. A reduced H2S-rich fluid is also supported by the bright cathodoluminescence of calcite which indicates that it is Mn rich and Fe poor. Calcite has a narrow range of {delta}13C values (0.3-1.8{per thousand}) that are indistinguishable from those of the host Bootstrap limestone, indicating that CO2 in the fluid was from dissolution of the local limestone. These data suggest that dissolution and brecciation of the Bootstrap limestone occurred where H2S-rich fluids encountered more oxidizing fluids and formed sulfuric acid (H2SO4). Intense fracturing in the mine area by previous structural and hydrothermal events probably provided conduits for the descent of oxidized surface water which mixed with the underlying H2S-rich waters to form the dissolving acid. The surface-derived fluid apparently contained sufficient oxygen to produce H2SO4 from H2S but not enough to alter pyrite to Fe oxide. Although H2S is an important gold-transporting ligand, the temperature was too low to transport a significant amount of gold. The presence of analogous calcite- and barite-lined cavities in other Carlin-type deposits suggests that the generation (and oxidation) of H2S-rich meteoric waters was a common phenomenon in north-central Nevada. Previous sulfur isotope studies have also shown that the Paleozoic sedimentary rocks were the principal source of H2S in Devonian sedimentary exhalative-type, Jurassic intrusion-related, Eocene Carlin-type, and Miocene low-sulfidation gold deposits in the region. The similar sulfur source in all of these systems suggests that basin brines, magmatic fluids, and meteoric waters all evolved to be H2S-rich ore fluids by circulation through Paleozoic sedimentary rocks. Thus, although not directly related to gold mineralization, the recent hydrologic history of the deposit provides important clues to earlier ore-forming processes that were responsible for gold mineralization

Results 1 to 15 of 32
You probably didn't submit anything to search for