Community news

Speleology in Kazakhstan

Shakalov on 04 Jul, 2018
Hello everyone!   I pleased to invite you to the official site of Central Asian Karstic-Speleological commission ("Kaspeko")   There, we regularly publish reports about our expeditions, articles and reports on speleotopics, lecture course for instructors, photos etc. ...

New publications on hypogene speleogenesis

Klimchouk on 26 Mar, 2012
Dear Colleagues, This is to draw your attention to several recent publications added to KarstBase, relevant to hypogenic karst/speleogenesis: Corrosion of limestone tablets in sulfidic ground-water: measurements and speleogenetic implications Galdenzi,

The deepest terrestrial animal

Klimchouk on 23 Feb, 2012
A recent publication of Spanish researchers describes the biology of Krubera Cave, including the deepest terrestrial animal ever found: Jordana, Rafael; Baquero, Enrique; Reboleira, Sofía and Sendra, Alberto. ...

Caves - landscapes without light

akop on 05 Feb, 2012
Exhibition dedicated to caves is taking place in the Vienna Natural History Museum   The exhibition at the Natural History Museum presents the surprising variety of caves and cave formations such as stalactites and various crystals. ...

Did you know?

That rebelay is the reanchoring of a rope, usually to avoid rub points or split long pitches.?

Checkout all 2699 terms in the KarstBase Glossary of Karst and Cave Terms

What is Karstbase?



Browse Speleogenesis Issues:

KarstBase a bibliography database in karst and cave science.

Featured articles from Cave & Karst Science Journals
Chemistry and Karst, White, William B.
See all featured articles
Featured articles from other Geoscience Journals
Karst environment, Culver D.C.
Mushroom Speleothems: Stromatolites That Formed in the Absence of Phototrophs, Bontognali, Tomaso R.R.; D’Angeli Ilenia M.; Tisato, Nicola; Vasconcelos, Crisogono; Bernasconi, Stefano M.; Gonzales, Esteban R. G.; De Waele, Jo
Calculating flux to predict future cave radon concentrations, Rowberry, Matt; Marti, Xavi; Frontera, Carlos; Van De Wiel, Marco; Briestensky, Milos
Microbial mediation of complex subterranean mineral structures, Tirato, Nicola; Torriano, Stefano F.F;, Monteux, Sylvain; Sauro, Francesco; De Waele, Jo; Lavagna, Maria Luisa; D’Angeli, Ilenia Maria; Chailloux, Daniel; Renda, Michel; Eglinton, Timothy I.; Bontognali, Tomaso Renzo Rezio
Evidence of a plate-wide tectonic pressure pulse provided by extensometric monitoring in the Balkan Mountains (Bulgaria), Briestensky, Milos; Rowberry, Matt; Stemberk, Josef; Stefanov, Petar; Vozar, Jozef; Sebela, Stanka; Petro, Lubomir; Bella, Pavel; Gaal, Ludovit; Ormukov, Cholponbek;
See all featured articles from other geoscience journals

Search in KarstBase

Your search for sulfide deposits (Keyword) returned 9 results for the whole karstbase:
Genesis of paleokarst and strata-bound zinc-lead sulfide deposits in a Proterozoic dolostone, northern Baffin Island, Canada, 1984, Olson R. A. ,
Society Cliffs Formation; episodes of karstification since its deposition. During the first karst episode an evaporite solution-collapse breccia formed ubiquitously on the western Borden Peninsula. During the second karst episode a holokarst developed and an integrated cave system was formed. The caves subsequently were filled with sulfides and carbonate minerals; several interesting sedimentary structures exist in the zinc-lead sulfide deposits. The ore fluid and contained metals are postulated to have been derived during a late-stage dewatering of the black shale that underlies the Society Cliffs Formation. Sulfide deposition may have been caused by chemical reduction of sulfate that existed in the ore fluid when the fluid entered hydrocarbon-filled caves. During the third and fourth episodes of karstification, only merokarst developed in the Society Cliffs Formation. Karst effects which formed during these episodes include oxidized sulfide deposits and surface solution corridors.--Modified journal abstract

Genesis of paleokarst and strata-bound zinc/lead sulfide deposits in a Proterozoic dolostone, Northern Baffin Island - a discussion, 1987, Ford D. C.

The Ozark region of the U.S. midcontinent is host to a number of Mississippi Valley-type districts, including the world-class Viburnum Trend, Old Lead Belt, and Tri-State districts and the smaller Southeast Missouri barite, Northern Arkansas, and Central Missouri districts. There is increasing evidence that the Ozark Mississippi Valley-type districts formed locally within a large, interconnected hydrothermal system that also produced broad fringing areas of trace mineralization, extensive subtle hydrothermal alteration, broad thermal anomalies, and regional deposition of hydrothermal dolomite cement. The fluid drive was provided by gravity flow accompanying uplift of foreland thrust belts during the Late Pennsylvanian to Early Permian Ouachita orogeny. In this study, we use chemical speciation and reaction path calculations, based on quantitative chemical analyses of fluid inclusions, to constrain likely hydrothermal brine compositions and to determine which precipitation mechanisms are consistent with the hydrothermal mineral assemblages observed regionally and locally within each Mississippi Valley-type district in the Ozark region. Deposition of the regional hydrothermal dolomite cement with trace sulfides likely occurred in response to near-isothermal effervescence of CO2 from basinal brines as they migrated to shallower crustal levels and lower confining pressures. In contrast, our calculations indicate that no one depositional process can reproduce the mineral assemblages and proportions of minerals observed in each Ozark ore district; rather, individual districts require specific depositional mechanisms that reflect the local host-rock composition, structural setting, and hydrology. Both the Northern Arkansas and Tri-State districts are localized by normal faults that likely allowed brines to rise from deeper Cambrian-Ordovician dolostone aquifers into shallower carbonate sequences dominated by limestones. In the Northern Arkansas district, jasperoid preferentially replaced limestones in the mixed dolostone-limestone sedimentary packages. Modeling results indicate that the ore and alteration assemblages in the Tri-State and Northern Arkansas districts resulted from the flow of initially dolomite-saturated brines into cooler limestones. Adjacent to fluid conduits where water/rock ratios were the highest, the limestone was replaced by dolomite. As the fluids moved outward into cooler limestone, jasperoid and sulfide replaced limestone. Isothermal boiling of the ore fluids may have produced open-space filling of hydrothermal dolomite with minor sulfides in breccia and fault zones. Local mixing of the regional brine with locally derived sulfur undoubtedly played a role in the development of sulfide-rich ore runs. Sulfide ores of the Central Missouri district are largely open-space filling of sphalerite plus minor galena in dolostone karst features localized along a broad anticline. Hydrothermal solution collapse during ore deposition was a minor process, indicating dolomite was slightly undersaturated during ore deposition. No silicification and only minor hydrothermal dolomite is present in the ore deposits. The reaction path that best explains the features of the Central Missouri sulfide deposits is the near-isothermal mixing of two dolomite-saturated fluids with different H2S and metal contents. Paleokarst features may have allowed the regional brine to rise stratigraphically and mix with locally derived, H2S-rich fluids

Vadose weathering of sulfides and limestone cave development-Evidence from eastern Australia., 1996, Osborne R. A. L.

Many significant limestone caves in eastern Australia (particularly New South Wales, Tasmania) are associated with sulfide deposits and other ore bodies. These deposits have a variety of origins (hydrothermal, paleokarst, volcaniclastic). The sulfides weather on exposure to oxygen - rich vadose seepage water, lowering the water pH and releasing sulfate and magnesium which can lead to the deposition of gypsum and aragonite speleothems. Removal of weathered ores and ore - bearing paleokarst sediments in the vadose zone is, in places, an important mechanism for the formation of large caverns.

The Shaimerden Supergene Zinc Deposit, Kazakhstan: A Preliminary Examination, 2003, Boland Mb, Kelly Jg, Schaffalitzky C,
The Shaimerden supergene zinc deposit in the southern Urals Mountains is located in the province of Kostanai in northwest Kazakhstan. It lies at the southern end of the Kostanai megasyncline, a north-northeast-trending, structurally controlled area of lower Paleozoic clastic and carbonate sedimentary rocks and volcanic rocks. A zinc-lead resource estimated at 4,645,100 tonnes at 21.06 percent Zn has been defined. The deposit is hosted within a sequence of intertidal to open-marine carbonates and evaporites of Visean (Early Carboniferous) age. Although drilling to date has not intersected a fault, significant faulting in the area is suggested by the presence of polymict debris flows comprising a wide range of carbonate facies and by large variations in micropaleontologic dates. Sulfide deposits replaced hydrothermally dolomitized carbonates and were subsequently reworked into polymict conglomerates of probable Carboniferous age that were deposited in a marine environment. Weathering of the sulfide mineral deposits took place during the Triassic Period, following uplift during the late Paleozoic. The weathering occurred in situ, and small intervals of relict sulfides were preserved in the center of the deposit. The degree of weathering increases outward from the center of the deposit, which passes from massive sulfide to massive hemimorphite-smithsonite to weathered clays with hemimorphite-smithsonite fragments. The supergene minerals are overlain by bauxitic clays of Cretaceous age and Quaternary silty soils and sands

Formation of Willemite in Hydrothermal Environments, 2003, Brugger J, Mcphail Dc, Wallace M, Waters J,
Willemite (zinc silicate) is the main zinc mineral in some carbonate-hosted ore deposits (e.g., Franklin, New Jersey; Vazante, Brazil; Beltana, South Australia; Kabwe, Zambia). Recent interest in these unconventional zinc deposits has increased because of high zinc grades that exceed 40 wt percent, relatively low environmental impact of ore processing owing to the lack of acid-generating sulfides in the waste, and advances in ore processing technologies. In the past, most metallogenic studies proposed formation of willemite deposits by supergene or hypogene alteration of preexisting sulfide deposits. However, recent data on the Vazante, Beltana, and Kabwe deposits indicate willemite crystallization at temperatures in excess of 150{degrees}C, raising the possibility of primary precipitation from hydrothermal fluids. We use numerical geochemical modeling to examine the formation of willemite under hydrothermal conditions. Activity-activity diagrams reveal that, in the presence of dissolved sulfur and quartz, willemite instead of sphalerite will precipitate under oxidizing (e.g., hematite-stable, sulfate-predominant) and alkaline (pH higher than K feldspar-muscovite-quartz) conditions. Willemite also becomes more stable, relative to sphalerite, at high temperature, and willemite can coexist with magnetite at 300{degrees}C. The stabilities and solubilities of sphalerite, willemite, smithsonite, hydrozincite, and zincite were calculated for wide ranges of temperature (25{degrees}-300{degrees}C), chloride concentration, dissolved sulfur and carbon concentrations, pH, quartz saturation, and oxidation potential. Plots of the solubility of the different minerals as a function of two variables (e.g., temperature and redox state; pH and redox state) allow us to predict the effects of changing chemical conditions, which in turn permits an estimate of the efficiency of particular precipitation processes. Cooling is an effective process for precipitating sphalerite but not willemite, whereas pH increase (e.g., by acidic fluids reacting with carbonates) is effective for precipitating willemite but not sphalerite. Dynamic geochemical models that simulate physicochemical processes are used to understand the formation of the Beltana willemite deposit in the Adelaide geosyncline of South Australia. This small, high grade deposit (850,000 t at 36% Zn) is hosted in dolomite of the Cambrian Ajax Limestone, next to a tectonic contact with the diapiric, halite-bearing clastic sediments of the Callanna Group. The orebody is associated with hematite alteration and is characterized by the total absence of sulfides; willemite is the only zinc ore mineral, and the arsenate hedyphane (Ca2Pb3[AsO4]3Cl) is the main lead mineral. The model results show that willemite will precipitate in response to water-rock interaction and fluid mixing processes at temperatures above 120{degrees}C. The presence of arsenate in the hydrothermal fluid is likely to have been important at Beltana; in arsenate-absent models sulfate is reduced to sulfide by the precipitation of ferrous iron as hematite, resulting in the precipitation of sphalerite and galena. In contrast, in models including arsenate the reduction of sulfate to sulfide is inhibited and willemite is predicted to precipitate

Classification, Genesis, and Exploration Guides for Nonsulfide Zinc Deposits, 2003, Hitzman Murray W. , Reynolds Neal A. , Sangster D. F. , Allen Cameron R. , Carman Cris E. ,
Nonsulfide zinc deposits, popularly but incorrectly termed 'zinc oxide' deposits, are becoming attractive exploration targets owing to new developments in hydrometallurgy. They are divided into two major geologic types--supergene and hypogene deposits. Supergene deposits are the most common type of nonsulfide zinc deposit and are distributed worldwide. The vast majority occur in carbonate host rocks owing to the high reactivity of carbonate minerals with the acidic, oxidized, zinc-rich fluids derived from the oxidative destruction of sphalerite-bearing sulfide bodies. Formation of these deposits depends upon the size and mineralogy of the preexisting zinc occurrence, vertical displacement of the water table, rate of water table descent through tectonic uplift and/or arid climatic conditions, wall-rock fracture density, and a suitable neutralizing trap site. Weathering of Mississippi Valley-type and high-temperature carbonate replacement-type zinc deposits may generate significant supergene nonsulfide zinc deposits, but the weathering of pyrite-rich, sedimentary exhalative, and volcanogenic massive sulfide deposits is much less likely to form economic supergene zinc deposits. Three subtypes of supergene nonsulfide zinc deposits are recognized--direct replacement, wall-rock replacement, and residual and karst-fill deposits. Hypogene nonsulfide zinc deposits are more poorly known owing to the paucity of examples; however, two major subtypes are recognized: structurally controlled, replacement bodies and manganese-rich, exhalative(?) stratiform bodies. The structurally controlled bodies contain willemite and variable amounts of sphalerite, are hematitic, and are generally associated with hydrothermal dolomitization. Stratiform, manganese-rich, nonsulfide zinc deposits appear to be end members of a spectrum of deposits that include base metal-poor stratiform manganese deposits and sulfide-dominant Broken Hill-type deposits. Hypogene nonsulfide zinc deposits appear to have formed owing to the mixing of a reduced, low- to moderate-temperature (80{degrees}-200{degrees}C), zinc-rich, sulfur-poor fluid with an oxidized, sulfur-poor fluid

The Padaeng Supergene Nonsulfide Zinc Deposit, Mae Sod, Thailand, 2003, Reynolds Neal A. , Chisnall Tony W. , Kaewsang Kriangsak, Keesaneyabutr Chanan, Taksavasu Taksorn,
The Padaeng deposit near Mae Sod in western Thailand was the first supergene nonsulfide zinc deposit in the world to be developed as a large modern mining operation. The mine and associated zinc smelter, operated by Padaeng Industry Public Company Ltd. since 1984, went into production with reserves of 4.59 Mt at a grade of 28.9 percent zinc with a 10 percent zinc cutoff. Current resources are 5.14 Mt at a grade of 12.0 percent zinc with a 3 percent zinc cutoff. The Padaeng deposit is hosted by a mixed carbonate-clastic sequence of Middle Jurassic age. The deposit occurs in the hanging wall of the Padaeng fault, a major northwest-trending structure that was active through Cretaceous and Tertiary tectonism and uplift. Nonsulfide zinc ore comprises dominant hemimorphite with minor smithsonite and hydrozincite. Strata-bound ore zones occur within a northwest-dipping, deeply weathered, dolomitic sandstone; steeply dipping and irregular karstic zones in underlying massive, silty dolomite are controlled by north-trending fracture zones. Sulfide zinc-lead mineralization of Mississippi Valley type occured extensively in the vicinity of the Padaeng mine, most notably the small resources at Pha De and Hua Lon. Mineral deposits are typically sphalerite rich with minor galena and pyrite, forming small-scale open-space fillings, veins, and replacements within hydrothermal dolomite. Mineralization is dominantly strata bound within a horizon of intense hydrothermal dolomitization that forms the stratigraphic hanging wall to the nonsulfide ore zones at Padaeng. The only significant sulfide at the Padaeng mine is within this unit. Only trace sulfide occurs peripheral to, or down dip of, strata-bound or steeply dipping, nonsulfide orebodies. Sulfide mineralization is believed to have accompanied Cretaceous uplift and deformation, related to the onset of oblique subduction beneath the western margin of the Shan-Thai terrane. The nonsulfide deposit is believed to have formed when a substantial body of sulfide ore was uplifted on the margin of the Mae Sod Tertiary intermontane basin, commencing in the middle to late Miocene. Zinc-bearing acidic supergene fluids, generated by oxidation of the precursor sulfide body, reacted with carbonate in the underlying stratigraphic section to precipitate hemimorphite and smithsonite. Fluids were channeled by permeable dolomitic sandstones and by steep fracture and fault zones. Acidic fluids promoted deep weathering and karst formation, allowing mineralization to extend down dip in sandstone units for at least 150 m and vertically for a similar distance in steep structural zones. Transport of zinc out of the precursor sulfide body was facilitated by a falling water table, owing to uplift of the Padaeng fault block and a change from wet tropical to monsoonal or semiarid climatic conditions. There is no evidence for significant in situ replacement of sulfide deposits, and the leached remnants of the precursor sulfide body have been removed by erosion. The supergene process of dissolution and reprecipitation of zinc in the host rocks increased zinc grades and separation of zinc from lead, producing an economically attractive deposit. Successful exploration for this type of deposit requires a good understanding of the controls on primary sulfide mineralization and a good knowledge of local neotectonism, uplift history, hydrogeology, climatic evolution, and weathering history

Structurally controlled hydrothermal dolomite reservoir facies: An overview, 2006, Davies G. R. , Smith Jr. L. B.

Structurally controlled hydrothermal dolomite (HTD) reservoir facies and associated productive leached limestones are major hydrocarbon producers in North America and are receiving increased exploration attention globally. They include multiple trends in the Ordovician (locally, Silurian and Devonian) of the Michigan, Appalachian, and other basins of eastern Canada and the United States, and in the Devonian and Mississippian of the Western Canada sedimentary basin. They also occur in Jurassic hosts along rifted Atlantic margins, in the Jurassic–Cretaceous of the Arabian Gulf region and elsewhere. Hydrothermal dolomitization is defined as dolomitization occurring under burial conditions, commonly at shallow depths, by fluids (typically very saline) with temperature and pressure (T and P) higher than the ambient T and P of the host formation. The latter commonly is limestone. Proof of a hydrothermal origin for HTD reservoir facies requires integration of burial-thermal history plots, fluidinclusion temperature data, and constraints on timing of emplacement. Hydrothermal dolomite reservoir facies are part of a spectrum of hydrothermal mineral deposits that include sedimentary-exhalative lead-zinc ore bodies and HTD-hostedMississippi Valley–type sulfide deposits. All three hydrothermal deposits show a strong structural control by extensional and/or strike-slip (wrench) faults, with fluid flowtypically focused at transtensional and dilational structural sites and in the hanging wall. Transtensional sags above negative flower structures on wrench faults are favored drilling sites for HTD reservoir facies. Saddle dolomite in both replacive and void-fillingmodes is characteristic of HTD facies. For many reservoirs, matrix-replacive dolomite and saddle dolomite appear to have formed near-contemporaneously and from the same fluid and temperature conditions. The original host facies exerts a major influence on the lateral extent of dolomitization, resultant textures, pore type, and pore volume. Breccias zebra fabrics, shear microfractures, and other rock characteristics record short-term shear stress and pore-fluid-pressure transients, particularly proximal to active faults. High-temperature hydrothermal pulses may alter kerogen in host limestones, a process designated ‘‘forced maturation.’’ basement highs, underlying sandstone (and/ or carbonate?) aquifers (probably overpressured), and overlying and internal shale seals and aquitards also may constrain or influence HTD emplacement. Although many questions and uncertainties remain, particularly in terms of Mg and brine source and mass balance, recognition and active exploration of the HTD play continues to expand. Increasing use of three-dimensional seismic imagery and seismic anomaly mapping, combined with horizontal drilling oblique to linear trends defined by structural sags, helps to reduce risk 

Results 1 to 9 of 9
You probably didn't submit anything to search for